HP 2730p - EliteBook - Core 2 Duo 1.86 GHz Maintenance And Service Manual Download Page 20

Page: 20 / 126

2–8

Maintenance and Service Guide

External component identification

Right-side components

Item

Component

Description

HP Fingerprint Sensor
(fingerprint reader)

Allows a fingerprint logon to Windows instead of a password logon.

1394 port

Connects an optional IEEE 1394 or 1394a device, such as a camcorder.

Audio-out (headphone) jack

Produces sound when connected to optional powered stereo speakers,
headphones, ear buds, a headset, or television audio.

Audio-in (microphone) jack

Connects an optional computer headset microphone, stereo array
microphone, or monaural microphone.

SD Card Reader

Supports the following optional digital card formats:

■

Secure Digital (SD) Memory Card

■

MultiMediaCard (MMC)

USB port

Connects an optional USB device.

Security cable slot

Attaches an optional security cable to the computer.

✎

The security cable is designed to act as a deterrent, but it may not
prevent the computer from being mishandled or stolen.

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz































































































































Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands

HP 2730p - EliteBook - Core 2 Duo 1.86 GHz, Maintenance And Service Manual

Search results

Summary of Contents for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Reviews:

Related manuals for 2730p - EliteBook - Core 2 Duo 1.86 GHz

Brands by name

Popular brands