6
Data sheet | HP 2620 Switch Series
Ports
24 autosensing 10/100 ports (IEEE 802.3 Type
10BASE-T, IEEE 802.3u Type 100BASE-TX);
Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports (IEEE 802.3
Type 10BASE-T, IEEE 802.3u Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 open mini-GBIC (SFP) slots
12 RJ-45 autosensing 10/100 ports (IEEE
802.3 Type 10BASE-T, IEEE 802.3u Type
100BASE-TX); Media Type: Auto-MDIX;
Duplex: half or full
12 RJ-45 autosensing 10/100 PoE+ ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3at PoE+);
Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE
802.3u Type 100BASE-TX, IEEE
802.3ab Type 1000BASE-T); Duplex:
10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 open mini-GBIC (SFP) slots
24 RJ-45 autosensing 10/100 PoE+ ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3at PoE+);
Media Type: Auto-MDIX; Duplex: half or full
1 RJ-45 serial console port
2 autosensing 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type
1000BASE-T); Duplex: 10BASE-T/
100BASE-TX: half or full; 1000BASE-T:
full only
2 open mini-GBIC (SFP) slots
Physical characteristics
Dimensions
17.44(w) x 10(d) x 1.73(h) in
(44.3 x 25.4 x 4.39 cm) (1U height)
17.44(w) x 10(d) x 1.73(h) in
(44.3 x 25.4 x 4.39 cm) (1U height)
17.44(w) x 14.5(d) x 1.73(h) in
(44.3 x 36.83 x 4.39 cm) (1U height)
Weight
5.71 lb (2.59 kg), Fully loaded
7.03 lb (3.19 kg)
10.67 lb (4.84 kg), Fully loaded
Memory and processor
Processor
PowerPC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB
PowerPC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB
Power PC FreeScale 8313 @ 400 MHz, 512 MB
flash, 512 MB SDRAM, 4 MB flash ROM; packet
buffer size: 1 MB
Mounting
Mounts in an EIA-standard 19 in. telco rack
or equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack
or equipment cabinet (hardware included);
horizontal surface mounting only
Mounts in an EIA-standard 19 in. telco rack
or equipment cabinet (hardware included);
horizontal surface mounting only
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Routing/Switching capacity
MAC address table size
IPv6 Ready Certified
< 8.3 µs (LIFO 64-byte packets)
< 2.9 µs (LIFO 64-byte packets)
up to 9.5 million pps
12.8 Gb/s
16000 entries
IPv6 Ready Certified
< 8.3 µs (LIFO 64-byte packets)
< 2.9 µs (LIFO 64-byte packets)
up to 9.5 million pps
12.8 Gb/s
16000 entries
IPv6 Ready Certified
< 8.3 µs (LIFO)
< 2.9 µs (LIFO)
up to 9.5 million pps
12.8 Gb/s
16000 entries
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage
relative humidity
Altitude
Acoustic
32°F to 131°F (0°C to 55°C)
15% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90%, noncondensing
up to 10,000 ft (3 km)
Power: 0 dB, Pressure: 0 dB No Fan
32°F to 131°F (0°C to 55°C)
15% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90%, noncondensing
up to 10,000 ft (3 km)
Power: 37.1 dB, Pressure: 25.9 dB
32°F to 131°F (0°C to 55°C)
15% to 95%, noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90%, noncondensing
up to 10,000 ft (3 km)
Power: 34.0 dB, Pressure: 29.7 dB
HP 2620-24 Switch (J9623A)
HP 2620-24-PPoE+ Switch (J9624A)
HP 2620-24-PoE+ Switch (J9625A)
HP 2620 Switch Series
Specifications
