HP 242 G1 Maintenance And Service Manual Download Page 61

Page: 61 / 112

Remove the top cover

(2)

Reverse this procedure to install the top cover.

Fingerprint reader board

Description

Spare part number

Fingerprint reader board (includes bracket and cable)

725239-001

Before removing the power button board, follow these steps:

Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.

Disconnect the power from the computer by unplugging the power cord from the computer.

Disconnect all external devices from the computer.

Remove the battery (see

Battery on page 33

) and then remove the following components:

Hard drive (see

Hard drive on page 34

)

Memory module service cover (see

Memory module on page 40

)

Optical drive (see

Optical drive on page 42

)

Keyboard (see

Keyboard on page 47

)

Top cover (see

Top cover on page 50

)

Remove the fingerprint reader board:

Disconnect the fingerprint reader ribbon cable from the board

(1)

Remove the Phillips PM2.0×4.0 screw

(2)

that secures the fingerprint reader bracket to the top

cover.

Chapter 6 Removal and replacement procedures for Authorized Service Provider parts

Summary of Contents for 242 G1

















































































































Search results

Summary of Contents for 242 G1

Reviews:

Related manuals for 242 G1

Brands by name

Popular brands

HP 242 G1, Maintenance And Service Manual

Search results

Summary of Contents for 242 G1

Reviews:

Related manuals for 242 G1

Brands by name

Popular brands