HP 2230s - Compaq Business Notebook Maintenance And Service Manual Download

Page: 63 / 130

Removal and replacement procedures

4–29

3. If it is necessary to remove the display inverter:

a. Use a flat bladed screwdriver to release the inverter

, which is secured with double-sided tape.

b. Disconnect the backlight cable

and the display panel cable

from the display inverter. The display

inverter is available using spare part number 493193-001.

4. If it is necessary to remove the display panel:

a. Remove the six Phillips PM2.0×5.0 screws

that secure the display panel to the display enclosure.

b. Remove the display panel

from the display enclosure.

Summary of Contents for 2230s - Compaq Business Notebook



































































































































Search results

Summary of Contents for 2230s - Compaq Business Notebook

Reviews:

Related manuals for 2230s - Compaq Business Notebook

Brands by name

Popular brands

HP 2230s - Compaq Business Notebook, Maintenance And Service Manual

Search results

Summary of Contents for 2230s - Compaq Business Notebook

Reviews:

Related manuals for 2230s - Compaq Business Notebook

Brands by name

Popular brands