HP 170X - JetDirect Print Server, Installation And Configuration Manual, Page: 29 / 80

EtherTalk or LocalTalk Networks (Mac OS) (For J4101B only) 23
5
Click OK .
If you try to name your printer the same name as
another printer, an alert dialog box appears directing
you to select another name. To select another name,
repeat steps 4 and 5.
6
If your printer is on an EtherTalk network, continue
with the next section, “Selecting a Zone.”
7
To exit, select
Quit
from the
File
menu.
Notify everyone on your network of the new name
for your printer so they can select the printer in the
Chooser.
Selecting a Zone
The HP LaserJet Utility allows you to select a preferred
zone for your printer on a Phase 2 EtherTalk network.
Instead of your printer remaining on the default zone,
which is set by the router, this utility lets you select
the zone on which your printer appears. The zones on
which your printer can reside are limited by your
network configuration. The HP LaserJet Utility only
enables you to select a zone that is already
configured for your network.
Zones are groups of computers, printers, and other
AppleTalk devices. They can be grouped by physical
location (for example, Zone A may contain all the
printers on the network in building A). They may also
be grouped logically (for example, all printers used in
the finance department).
If you are using LocalTalk, skip this section, select
Quit
from the
File
menu, then go to “Selecting Your
Printer.”
1
Select the
Settings
icon from the scrolling icon list.
The Please Select a Setting: dialog box appears.
2
Select
Printer Zone
in the list and click
Edit
. The
Select a Zone dialog box appears.
3
Select your preferred network zone from the Select a
Zone:
list and click
Set Zone
.
4
To exit, select Quit from the File menu.
Notify everyone on your network of the new zone for
your printer so they can select the printer in the
Chooser.