HP 170X - JetDirect Print Server, Installation And Configuration Manual

Page: 22 / 80

16 C
HAPTER
3: HP S
OFTWARE
S
OLUTIONS
Verifying Installation and Providing Access
■
Verify that the HP Web JetAdmin software is
correctly installed by navigating to it with your
browser as shown in the following example:
http://server.domain:port/
where
server.domain
is the host name of your
web server and
port
is the port number assigned
during installation.
■
Provide users access to HP Web JetAdmin software
by adding a link to your web server’s home page
that is addressed to HP Web JetAdmin’s URL. For
example:
http://server.domain:port/
Configuring and Modifying a Device
Using your browser, navigate to HP Web JetAdmin’s
URL. For example:
http://server.domain:port/
Follow the instructions on the appropriate home page
to configure or modify your printer. These instructions
show you how to configure the printer and set up a
printer for printing.
You can also substitute the TCP/IP address for the
server.domain
.
Removing HP Web JetAdmin Software
To remove HP Web JetAdmin software from your web
server, use the uninstall program provided with the
software package.
HP Network Printer Installer 2.0
The HP Network Printer Installer v2.0 provides a
method for automatic installation and setup of a
printer when it is connected to the network. This
software is designed to operate in conjunction with
HP JetDirect print servers that support IP multicast. IP
multicast is available on newer HP JetDirect External
Printer Servers (firmware revision x.06.00 or greater).
If you do not have HP JetDirect Print Servers installed
that support multicast, your printers will not be
recognized by the software and will not be
automatically installed.