HP 17-ce0001 Page 68 Maintenance And Service Manual Download | Manualshive

Page: 68 / 82

background image

7

Using HP PC Hardware Diagnostics

Using HP PC Hardware Diagnostics Windows (select products

only)

HP PC Hardware Diagnostics Windows is a Windows-based utility that allows you to run diagnostic tests to
determine whether the computer hardware is functioning properly. The tool runs within the Windows
operating system in order to diagnose hardware failures.

If HP PC Hardware Diagnostics Windows is not installed on your computer, first you must download and install
it. To download HP PC Hardware Diagnostics Windows, see

Downloading HP PC Hardware Diagnostics

Windows on page 60

After HP PC Hardware Diagnostics Windows is installed, follow these steps to access it from HP Help and
Support or HP Support Assistant.

1.

To access HP PC Hardware Diagnostics Windows from HP Help and Support:

a.

Select the Start button, and then select HP Help and Support.

b.

Right-click HP PC Hardware Diagnostics Windows, select More, and then select Run as
administrator.

– or –

To access HP PC Hardware Diagnostics Windows from HP Support Assistant:

a.

Type

support

in the taskbar search box, and then select the HP Support Assistant app.

– or –

Select the question mark icon in the taskbar.

b.

Select Troubleshooting and fixes.

c.

Select Diagnostics, and then select HP PC Hardware Diagnostics Windows.

2.

When the tool opens, select the type of diagnostic test you want to run, and then follow the on-screen
instructions.

NOTE:

If you need to stop a diagnostic test at any time, select Cancel.

When HP PC Hardware Diagnostics Windows detects a failure that requires hardware replacement, a 24-digit
Failure ID code is generated. The screen displays one of the following options:

●

A Failure ID link is displayed. Select the link and follow the on-screen instructions.

●

A Quick Response (QR) code is displayed. With a mobile device, scan the code and then follow the on-
screen instructions.

●

Instructions for calling support are displayed. Follow those instructions.

Downloading HP PC Hardware Diagnostics Windows

●

The HP PC Hardware Diagnostics Windows download instructions are provided in English only.

●

You must use a Windows computer to download this tool because only .exe files are provided.

60

Chapter 7 Using HP PC Hardware Diagnostics

«
...
66
67
68
69
70
...
»

Summary of Contents for 17-ce0001



















































































Reviews:

No comments

Related manuals for 17-ce0001

Brand: XPG Pages: 30

Aspire V5-452PG

Brand: Acer Pages: 100

Brand: Clevo Pages: 61

Brand: Clevo Pages: 74

Brand: Clevo Pages: 134

Brand: Clevo Pages: 168

Brand: Clevo Pages: 156

Brand: Gateway Pages: 14

Brand: Bakker Elkhuizen Pages: 2

Brand: Gateway Pages: 96

Brand: Gateway Pages: 80

VNB108 ViewBook

Brand: ViewSonic Pages: 38

Brand: Humanscale Pages: 2

Brand: Eluktronics Pages: 44

Brand: Gateway Pages: 119

Brand: Gateway Pages: 168

Brand: Gateway Pages: 348

Brand: MSI Pages: 24

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands