Attaching a Socket Module onto HP 16442A Test Fixture
After choosing correct socket module for DUT, install the socket module into HP 16442A.
The following figure shows how to attach socket module to HP 16442A. Use the following
procedure to attach the socket module:
1. Confirm that voltage or current is
not
forced to HP 16442A.
2. Open the lid of HP 16442A.
3. Check that the black plastic fasteners of the socket module are unlocked (pulled up).
4. Push the socket module onto HP 16442A.
5. Press the black fasteners down to lock the socket module into place.
Use the following procedure to remove a socket module from HP 16442A:
1. Confirm that voltage or current is
not
forced to HP 16442A.
2. Open the lid of HP 16442A.
3. Disconnect the connection cables.
4. Pull up the black plastic fasteners on both sides of the socket module.
5. Lift the socket module from HP 16442A.
HP 16442A User’s Gude
7
Summary of Contents for 16442A
