background image

4

Removal and replacement procedures 
preliminary requirements

Use this information to properly prepare to disassemble and reassemble the computer.

Tools required

You need the following tools to complete the removal and replacement procedures:

Tweezers

Nonconductive, nonmarking pry tool

Magnetic Phillips P1 screwdriver

Service considerations

The following sections include some of the considerations that you must keep in mind during disassembly 
and assembly procedures.

NOTE:

As you remove each subassembly from the computer, place the subassembly (and all accompanying 

screws) away from the work area to prevent damage.

Plastic parts

Using excessive force during disassembly and reassembly can damage plastic parts.

Cables and connectors

Handle cables with extreme care to avoid damage.

IMPORTANT:

When servicing the computer, be sure that cables are placed in their proper locations during 

the reassembly process. Improper cable placement can damage the computer.

Apply only the tension required to unseat or seat the cables during removal and insertion. Handle cables by 
the connector whenever possible. In all cases, avoid bending, twisting, or tearing cables. Be sure that cables 
are routed so that they cannot be caught or snagged as you remove or replace parts. Handle flex cables with 
extreme care; these cables tear easily.

Drive handling

Note the following guidelines when handling drives.

22

Chapter 4   Removal and replacement procedures preliminary requirements

Summary of Contents for 15-cw1000













































































Reviews: