manualshive.com logo in svg

HP 15-BQ0 Series, Maintenance And Service Manual

Share
Download
HP 15-BQ0 Series Maintenance And Service Manual Download Page 40

Hard drive

NOTE:

The hard drive spare part kit does not include the hard drive bracket or the hard drive cable. The hard 

drive bracket is available using spare part number 924350-001. The hard drive cable is available using spare 
part number 924326-001.

Description

Spare part number

1-TB, 7200-rpm, SATA, 9.5-mm hard drive

766457-857

Before removing the hard drive, follow these steps:

1.

Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn 
the computer on, and then shut it down through the operating system.

2.

Disconnect all external devices connected to the computer.

3.

Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and 
then unplugging the AC adapter from the computer.

4.

Remove the bottom cover (see 

Bottom cover on page 29

).

5.

Remove the battery (see 

Battery on page 31

).

Remove the hard drive:

1.

Release the zero insertion force (ZIF) connector (1) to which the hard drive cable is connected, and then 
disconnect the hard drive cable from the system board.

2.

Use the tab built into the hard drive rubber sleeve to remove the hard drive (2).

32

Chapter 5   Removal and replacement procedures

Summary of Contents for 15-BQ0 Series

























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands