HP 14-dk0 Series Maintenance And Service Manual Download

Page: 77 / 96

NOTE:

To start diagnostics on a convertible computer, your computer must be in notebook mode, and you

must use the attached keyboard.

NOTE:

If you need to stop a diagnostic test, press

esc

Starting HP PC Hardware Diagnostics UEFI

To start HP PC Hardware Diagnostics UEFI, follow these steps:

Turn on or restart the computer, and quickly press

esc

Press

The BIOS searches three places for the diagnostic tools, in the following order:

Connected USB flash drive

NOTE:

To download the HP PC Hardware Diagnostics UEFI tool to a USB flash drive, see

Downloading the latest HP PC Hardware Diagnostics UEFI version on page 69

Hard drive

BIOS

When the diagnostic tool opens, select a language, select the type of diagnostic test you want to run,
and then follow the on-screen instructions.

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive

Downloading HP PC Hardware Diagnostics UEFI to a USB flash drive can be useful in the following situations:

●

HP PC Hardware Diagnostics UEFI is not included in the preinstall image.

●

HP PC Hardware Diagnostics UEFI is not included in the HP Tool partition.

●

The hard drive is damaged.

NOTE:

The HP PC Hardware Diagnostics UEFI download instructions are provided in English only, and you

must use a Windows computer to download and create the HP UEFI support environment because only .exe
files are provided.

Downloading the latest HP PC Hardware Diagnostics UEFI version

To download the latest HP PC Hardware Diagnostics UEFI version to a USB flash drive:

Go to

http://www.hp.com/go/techcenter/pcdiags

. The HP PC Diagnostics home page is displayed.

Select Download HP Diagnostics UEFI, and then select Run.

Downloading HP PC Hardware Diagnostics UEFI by product name or number (select products

only)

NOTE:

For some products, it may be necessary to download the software to a USB flash drive by using the

product name or number.

To download HP PC Hardware Diagnostics UEFI by product name or number (select products only) to a USB
flash drive:

Using HP PC Hardware Diagnostics UEFI

Summary of Contents for 14-dk0 Series

































































































Search results

Summary of Contents for 14-dk0 Series

Reviews:

Related manuals for 14-dk0 Series

Brands by name

Popular brands

HP 14-dk0 Series, Maintenance And Service Manual

Search results

Summary of Contents for 14-dk0 Series

Reviews:

Related manuals for 14-dk0 Series

Brands by name

Popular brands