HP 14-bw0 Series Maintenance And Service Manual Download Page 14

Page: 14 / 108

Component

Description

NOTE:

The security cable is designed to act as a deterrent, but

it may not prevent the computer from being mishandled or
stolen.

Left side

Component

Description

(1)

Power connector

Connects an AC adapter.

(2)

AC adapter and battery light

●

White: The AC adapter is connected and the battery is fully
charged.

●

Blinking white: The AC adapter is disconnected and the
battery has reached a low battery level.

●

Amber: The AC adapter is connected and the battery is
charging.

●

Off: The battery is not charging.

(3)

Vent

Enables airflow to cool internal components.

NOTE:

The computer fan starts up automatically to cool

internal components and prevent overheating. It is normal for
the internal fan to cycle on and off during routine operation.

(4)

External monitor port (select products only)

Connects an external VGA monitor or projector.

(5)

RJ-45 (network) jack/status lights

Connects a network cable.

●

White: The network is connected.

●

Amber: Activity is occurring on the network.

(6)

HDMI port

Connects an optional video or audio device, such as a high-
definition television, any compatible digital or audio component,
or a high-speed High-Definition Multimedia Interface (HDMI)
device.

Chapter 2 Getting to know your computer

Summary of Contents for 14-bw0 Series













































































































Search results

Summary of Contents for 14-bw0 Series

Reviews:

Related manuals for 14-bw0 Series

Brands by name

Popular brands

HP 14-bw0 Series, Maintenance And Service Manual

Search results

Summary of Contents for 14-bw0 Series

Reviews:

Related manuals for 14-bw0 Series

Brands by name

Popular brands