HP 10500 series, Security Configuration Manual, Page: 383 / 596

369
Establishing a connection to an Stelnet server based on Suite
B
Task Command Remarks
Establish a
connection to an
Stelnet server based
on Suite B.
•
Establish a connection to an IPv4 Stelnet server
based on Suite B:
ssh2 server [ port-number ] [ vpn-instance
vpn-instance-name ] suite-b [ 128-bit | 192-bit ]
pki-domain domain-name
[ server-pki-domain domain-name ]
[ prefer-compress zlib ] [ dscp dscp-value |
escape character | source { interface
interface-type interface-number | ip
ip-address } ] *
•
Establish a connection to an IPv6 Stelnet server
based on Suite B:
ssh2 ipv6 server [ port-number ]
[ vpn-instance vpn-instance-name ] suite-b
[ 128-bit | 192-bit ] pki-domain domain-name
[ server-pki-domain domain-name ] [ interface
interface-type interface-number ]
[ prefer-compress zlib ] [ dscp dscp-value |
escape character | source { interface
interface-type interface-number | ipv6
ipv6-address } ] *
Available in user view.
The client cannot establish
connections to both IPv4
and IPv6 Stelnet servers.
Configuring the device as an SFTP client
SFTP client configuration task list
Tasks at a glance
(Optional.) Specifying the source IP address for SFTP packets
(Required.) Establishing a connection to an SFTP server
(Optional.) Establishing a connection to an SFTP server based on Suite B
(Optional.) Working with SFTP directories
(Optional.) Working with SFTP files
(Optional.) Displaying help information
(Optional.) Terminating the connection with the SFTP server
Specifying the source IP address for SFTP packets
As a best practice, specify the IP address of the loopback interface as the source address of SFTP
packets for the following purposes:
•
Ensuring the communication between the SFTP client and the SFTP server.
•
Improving the manageability of SFTP clients in authentication service.
To specify the source IP address for SFTP packets: