2. Download and extract the Update Disk to a flexible diskette.
3. After booting to the UnitedLinux 1.0 installation CD, at the installation mode
menu (Installation, Installation – Safe Settings, Installation – APIC Enable, etc.)
press the ALT key.
4. Follow all on screen instructions to continue with the installation of the Update
Disk.
Installing HP supported UnitedLinux 1.0 drivers
HP Supports the following drivers for use with UnitedLinux 1.0 on HP Servers.
Component Name
Product Number UnitedLinux 1.0
Driver Name
UnitedLinux 1.0
Driver Version
NIC
HP 10/100 TX PCI LAN AdapterD5013B
e100.o
2.1.15
Intel 10/100 Dual Port Network
Interface card
P2511A e100.o 2.1.15
HP Gigabit Fiber Adapter
P2512A
e1000.o
4.3.15
HP Gigabit Copper Adapter
P3482A
bcm5700.o
4.0.2
HP IPSec 3DES Network
Interface card
P3492A e100.o 2.1.15
HP Gigabit Fiber Network
Interface card
P5451A bcm5700.o
4.0.2
HP Gigabit Copper Network
Interface card
P5545A e1000.o
4.3.15
HP Server Embedded Network
Interface card
N/A e100.o
2.1.15
SCSI
HP Ultra3 SCSI HBA
P3413A, P7692A
aic7xxx.o
6.2.8
Embedded SCSI (tc3100/tc4100) N/A sym53c8xx.o
2.1.17a
NOTE:
The correct IDE controller drivers are installed by default.
If the drivers listed above are not installed by default during the installation process, the
default driver should be removed and the HP supported driver listed above should be
installed. The drivers listed above are located on the UnitedLinux 1.0 CD.
Please consult the HP Server accessories compatibility matrix, located at the link below,
to verify which servers support the accessories listed in the above table:
http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=lpn14732
&locale=en_US&prodSeriesId=75195&prodTypeId=15351
2
