Headset and Pedals
50
HP
Velotechnik
Adjusting the headset (Speedmachine)
The headset of the Concept Spring contains
two not adjustable, industrial bearings. To
adjust the play of the fork bearing, please pay
attention to the chapter on page 56ff.
Danger!
The headset, handlebar, and
stem are relevant for the safety of your
bicycle. Maintenance and adjustment works
require a special knowledge. If you have
any question or doubt ask you special
dealer for information.
Pedal mounting
The threads of the pedal axles are different
for left and right to prevent them from be-
coming loose while pedaling.
Tightening direction for the pedal axles is in
the same direction like the crank turning
direction while pedalling forward. Therefor
the right pedal has standard thread, the left
pedal has left handed thread.
Mount the pedals with grease on the threads.
Use a 15 mm open end wrench or, on some
pedal types, a 6 mm Allen key for tightening,
and refer to the users manual of the pedal
manufacturer regarding tightening torques.