To replace the component, reverse the removal procedure.
Removing and replacing the LFF optical drive
Procedure
1.
Power down the server (
2.
Remove all power:
a.
Disconnect each power cord from the power source.
b.
Disconnect each power cord from the server.
3.
Do one of the following:
• Extend the server from the rack (
Extend the server from the rack
• Remove the server from the rack (
Remove the server from the rack
on page 37).
4.
Remove the access panel (
on page 39).
5.
Remove the fan cage (
Removing and replacing the fan cage
on page 52).
6.
Disconnect all cables from the LFF power switch module.
7.
Remove the LFF power switch module (
Removing and replacing the LFF power switch module
on
page 54).
8.
Remove the optical drive.
Removing and replacing the LFF optical drive
57
Summary of Contents for ProLiant DL380
