89
Vlan(id):100.
Total 1 IP Group(s).
Total 1 IP Source(s).
Total 1 MAC Group(s).
Router port(s):total 1 port(s).
Eth1/0/1 (D)
IP group(s):the following ip group(s) match to one mac group.
IP group address:FF1E::101
(::, FF1E::101):
Host port(s):total 1 port(s).
Eth1/0/3 (D)
MAC group(s):
MAC group address:3333-0000-0101
Host port(s):total 1 port(s).
Eth1/0/3
IPv6 multicast source and user control policy configuration
example
Network requirements
As shown in
, Switch A is a Layer-3 switch. MLDv1 runs on Switch A and MLDv1 snooping runs
on Switch B. Multicast sources and hosts run 802.1X client.
An IPv6 multicast source control policy is configured on Switch A to block multicast flows from Source 2
to FF1E::101. An IPv6 multicast user control policy is configured on Switch B so that Host A can join or
leave only multicast group FF1E::101.
Figure 28
Network diagram
Configuration procedures
1.
Enable IPv6 forwarding and configure an IP address and prefix length for each interface as
per
. (Details not shown.)
2.
Configure Switch A:
