Contact Aruba
Copyright
© Copyright 2018 Hewlett Packard Enterprise Development LP
Open Source Code
This product includes code licensed under the GNU General Public
License, the GNU Lesser General Public License, and/or certain other
open source licenses.
A complete machine-readable copy of the source code corresponding
to such code is available upon request. This offer is valid to anyone in
receipt of this information and shall expire three years following the
date of the final distribution of this product version by Hewlett
Packard Enterprise Company.
To obtain such source code, send a check or money order in the
amount of US $10.00 to:
Hewlett Packard Enterprise Company
Attn: General Counsel
3000 Hanover Street
Palo Alto, CA 94304
USA
Warranty
This hardware product is protected by an Aruba warranty.
For more details visit
www.hpe.com/us/en/support.html
and select
the “HPE Servers, Storage, and Networking” option from the Product
Support menu to access HPE’s Warranty Check.
3333 Scott Boulevard
Santa Clara, California 95054
USA
Main Site
http://www.arubanetworks.com
Support Site
http://support.arubanetworks.com
Airheads Social Forums
and Knowledge Base
http://community.arubanetworks.com/
North America Telephone
1-800-943-4526
1-408-754-1200
International Telephone
http://www
.arubanetworks.com/
support-services/contact-support/
Software Licensing Site
http://www
.hpe.com/networking/
support
End-of-Life Information
http://www
.arubanetworks.com/
support-services/end-of-life/
Security Incident
Response Team (SIRT)
http://www
.arubanetworks.com/
support-service/security-bulletins/
Email: [email protected]
RF Radiation Exposure Statement
This equipment complies with RF radiation exposure limits. This
equipment should be installed and operated with a minimum distance
of 13.78 inches (35cm) between the radiator and your body for 2.4
GHz and 5 GHz operations. This transmitter must not be co-located or
operating in conjunction with any other antenna or transmitter.
Mexico
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operación
no deseada.
Este equipo ha sido diseñado para operar con las antenas que
enseguida se enlistan, en los puntos 4 y 5 de:
www.arubanetworks.com/assets/og/OG_AP-340Series.pdf
y para una
ganancia máxima de antena de 8.5 dBi.
El uso con este equipo de antenas no incluidas en esta lista o que
tengan una ganancia mayor que 8.5 dBi quedan prohibidas La
impedancia requerida de la antena es de 50 ohms
Ukraine
Hereby, Hewlett Packard Enterprise Company declares that the radio
equipment type [The Regulatory Model Number [RMN] for this device
can be found on page 1 of this document] is in compliance with
Ukrainian Technical Regulation on Radio Equipment, approved by
resolution of the CABINET OF MINISTERS OF UKRAINE dated May 24,
2017, No. 355. The full text of the UA declaration of conformity is
available at the following internet address :
certificates.ext.hpe.com/public/certificates.html
United States
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee
that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit that is different
from that to which the receiver is connected.
Consult the dealer or an experienced radio or television technician for
help.
Improper termination of access points installed in the United States
configured to a non-US model controller is a violation of the FCC grant
of equipment authorization. Any such willful or intentional violation
may result in a requirement by the FCC for immediate termination of
operation and may be subject to forfeiture (47 CFR 1.80).
For additional safety and regulatory information about this product,
refer to the
Aruba 340 Series Access Point Installation Guide.
2412-2472
20 dBm
5150-5250
23 dBm
5250-5350
23 dBm
5470-5725
30 dBm
5725-5850
N/A for EU
Frequency Range MHz
Max EIRP
