These symbols are used throughout the instruction manual to alert the user to potential
safety hazards as follows :
… Notice when incorrect handling could cause the user's death or
serious injury.
… Notice when incorrect handling could cause injury to the user or
material
damage.
Even if the instructions do not have mark, there are some possibilities for a
serious situation. Follow the instructions.he instructions.
2
Clamping sections
Designation marking
Please purchase applicable die heads
separately if you do not have them.
* When using the C-702 for the first time, practice the following procedure using
a discarded spoke until you are familiar with this device.
Prepare a bench vise and a 2.5 mm hex wrench.
1
2
2.3 mm
φ
2.0 mm
φ
1.8 mm
φ
1 Maintain proper posture when using this tool.
2 Wear goggles when using this tool.
3 Do not modify this tool.
4 Do not use when cracks, breaks, wear or deformation is found on this tool.
5 Keep applicability of spoke size and die head.
6 Periodically lubricate the die head and all moving parts.
7 The die head is consumable. The degree of wear will vary depending on the
frequency of use.
8 Use this tool securing in a vise. The vise must be fixed securely to the workbench.
9 Do not tighten any of the adjust nuts more than necessary.
10 The die head is packed in an anti-rust bag. Please store the die head in this
yellow bag after use.
Precautions
Operation
Warning and caution symbols
Caution
Use the vise in the state fixed on
the workbench securely.
Caution
Warning
Caution
Fix this tool on a vise firmly by the
clamping sections.
Attach the die head
applicable to the
spoke to be worked
on the body
Designation
Size
Thread size
#13
BC2.3
C-707-13
#14
BC2.0
C-707-14
#15
BC1.8
C-707-15
Spoke sizes
Die head
Part numbers
Caution
Tightened
Insert
