TAP
(based upon
Italian standard)
C-405-2
Specifications
36 mm
×
24 TPI
Applicable
bottom bracket
Material
Weight
80 g
SKHG
Ⅱ
(
high
speed steel)
This tap is for replacing the
provided tap of the C-405 when
processing bottom brackets which
use Italian standard threads (36
mm
×
24 TPI). Do not use for any
other purpose.
Precautions
Caution
1. Be careful in handling, since this is a precision cutting tool. Do not
drop or throw
down. This could damage this
tap.
2. Do not use when cracks, breaks, excessive wear or deformation
is found on this
tap.
Refer to [Operation] of C-405’s
instruction manual.
Refer to [Preparation] of C-405’s
instruction manual.
Installing onto C-405
Operation
Without using a wrench, tighten the
tap set nut with you hand. Overdo
could damage the tap.
Caution
Be careful in turning direction. Unlike
JIS size, turn the both of left and
right tap drivers clockwise, to the
operator, for Italian standard.
Caution
Daily care
●
Remove the cut scrap from taps after use. Store avoiding shocks.
●
Lubricate periodically with an oiled cloth to prevent rusting.
INSTRUCTION MANUAL
1-2-12 Saiwaicho, Naniwa-ku, Osaka 556-0021, Japan
Tel : +81-6-6567-3111
F a x : +81-6-6562-0024
16.04
