manualshive.com logo in svg

Hoyt RECURVE, Owner'S Manual, Page: 26 / 32

Share
Download
Hoyt RECURVE Owner'S Manual Download Page 26

26

25" 

Prodigy

Prodigy XT

Formula HPX, 

ION-X & GPX

Length

String Length

Brace Height

64"

61.25"

7.25 - 8.0"

66"

63.25"

7.5- 8.0

68"

65.25"

7.75 - 8.25"

70"

67.25"

8.0 - 8.75"

27"

Prodigy

Prodigy XT & 

ION-X 

Length

String Length

Brace Height

66"

63.25"

7.5 - 8.0"

68"

65.25"

8.0 - 9.0

70"

67.25"

8.0 - 8.75"

72"

69.25"

8.0 - 9.0"

VERTATUNE PLATE

To install your VertaTune plate sim-

ply place the VertaTune plate into 

the riser and fix it to the riser 

by using the VertaTune bolt and 

washer. Note: do not over tighten 

the VertaTune Bolt. (See photo E) 

This is useful for switching from an 

indoor to an outdoor arrow or vice-

versa and also provides an easy 

way to switch in a backup arrow 

rest (using an identical VertaTune 

plate, available from your Genuine 

Hoyt Retailer)

The VertaTune plates come in 3 

configurations (high, medium & 

low) which allows you to change 

the arrow rest height for a total of 1/4" (1/8" between high 

and medium, 1/8" between medium and low)

FINE TUNING

For advanced methods, see your local dealer. An additional 

source of detailed information is the Easton Arrow Tuning 

and Maintenance Guide, available online at www.eastonar-

chery.com.

Photo E

Summary of Contents for RECURVE

































Reviews:

No comments