Hoyt Electrical Instrument Works, Inc.
www.hoytmeter.com
Phone: (800) 258-3652
Fax: (603) 753-9592
Email: [email protected]
Page 2 (2)
23 Meter Street
Penacook, NH 03303
LAN Cable Tester
Model 185 LST
Receiving
end (IN)
Sourcing
end (OUT)
Loopback Test
Remote Test
● Plug one end of the testing cable into the RJ45
jack of sourcing end on the master unit and
another end of the testing cable into the RJ45
jack of receiving end on the master unit.
● Press the " " button, the master unit will start a
sequential scanning process if the master unit is in
"auto-scanning" mode.
● Press the " " button, the pin1 LED lamps of the
LED indicators will be alight if the master unit is in
"manual-scanning" mode.
Note: When the battery power is low, the testing
results may not be correct. Please replace with a
new battery.
● You can choose a auto-scanning mode or a
manual scanning mode by pressing the "AUTO"
button or the "MANU" button.
● The Lock function is available in "auto-scanning"
mode.
● When the loop is "OPEN", you will hear the sound
of the buzzer.
Operations
Loopback test
● Plug one end of the testing cable into the RJ45
jack of sourcing end on the master unit and
another end of the testing cable into the RJ45
jack of the remote receiving unit, then make test.
● Read the testing results from the LED indicator on
the remote receiving unit.
Remote test
Test result
