Open Merchandisers
Multi Purpose - Endless Design
Standard Specifications and Optional Features
OPTIONAL FEATURES
A Division of HMC Enterprises LLC •
2501 Grant Avenue • Philadelphia, PA 19114 USA
(215) 464-6800 • 1-800-344-8222 • Fax (215) 969-4890 • E-Mail: [email protected] • www.howardmccray.com
Multi deck
Foamed in place CFC free foam
Heavy gauge steel super structure
Endless design allows for continuous line up
Designer white or black end panels
Designer white or black front rail
Designer white or black end trim
Coated galvanized rear
CONSTRUCTION
FINISHES
INTERIOR
REFRIGERATION
EXTERIOR
LIGHTING
ELECTRICAL REQUIREMENTS
Designer white or black end panels
Designer white or black perforated rear wall
(for
even air distribution)
Full length lighting at top of unit
5 levels of product display
Stylish tag molding on each shelf
R404A expansion valve
Low velocity fans located below deck area
(to
insure even flow of air)
Air screen technology
Remote only
Designer white or black ends and front
Designer white or black end trim
1 row at inside top of unit
Unit must be hard wired
See technical page for voltage
Night covers
Peg bars
Insulated divider for line ups
Lighted shelves
Stainless steel, laminate or paint
Product stops on shelving
Digital thermometer
Important Note: All refrigerated cases are
designed to operate in an environment of
75 degrees and 55% relative humidity.
Important Note: Product must be cooled
before being displayed within the case.
Important Note: Plumbing required
(ALL WHITE OR ALL BLACK, NO EXTRA CHARGE—IF COLORS ARE MIXED AN ADDITIONAL CHARGE WILL APPLY)
