User Manual
Air Supply Keypad Functions
Transfer
Speed
High
Adjustable/
Pressure
Setting
Transfer
Speed
Low
Standby (Amber LED)
Power Indication
Adjustable Speed
Indication
(Green Flashing LED)
Green LEDs
The ADJUSTABLE keypad function has four different settings.
Each press of the button increases the air pressure and rate
of inflation. The Green Flashing LED will indicate the inflation
speed by the number of flashes (i.e. two flashes equals the
second inflation speed).
STANDBY: Used to stop inflation/air flow (Amber LED indicates
STANDBY mode).
Instructions for Use
1. Ensure the red deflation valves are capped tightly before beginning
inflation.
2. Place the Q
2
Roller on the bed mattress, and center using the Center
Line Indictor.
3. Tuck the securing apron of the Q
2
Roller under the bed mattress to
keep it in place during use.
4. Remove the backing from the adhesive strips on the Q
2
R Pad, and
center it on top of the Q
2
Roller (if the patient is already on the
mattress, place the device and pad under the patient using a
log-rolling technique).
5. With the patient centered on the device, ensure all bed/stretcher
rails are up.
6. Locate the inflation valve on the OPPOSITE side of the turn direction,
and place the air supply hose over the valve. Press the ADJUSTABLE
button on the HT-Air keypad to initiate air flow. If necessary, press this
button up to 3 more times to increase air flow and rate of inflation.
7. When the turn is complete, remove the hose from the valve and press
the STANDBY button on the air supply keypad to stop air flow. Cham-
ber may not need to be fully inflated to achieve desired position.
8. To quickly deflate the Q
2
Roller, remove the red cap from the deflation
valve. To slowly deflate or adjust the chamber, depress the center of
the black inflation valve.
Product Specifications/Required Accessories
Q2ROLLER
®
LATERAL TURNING DEVICE
Material:
Polyurethane
Construction:
RF Welded
Width:
Chambers: 46.5" (118 cm)
(combined chamber width)
Apron: 72" (183cm)
Length:
Chambers: 44.5" (113 cm)
Apron: 44" (112 cm)
LATEX FREE
Model #: HTR-200
Patient Weight Limit: 600 lbs. (272 kg)
Single-Patient Use
Q2R
®
PAD
Material:
Non-Woven, Breathable PE, Wooden Paper
Construction:
Thermal Bonding
Width:
39” (99 cm)
Length:
39” (99 cm)
T: 1300 106 003
www.hmsmedical.com.au
