Contact Customer Care 619 449-2392
Contact Customer Care: 619-449-2392
|3
Step 1a:
Press in silver alignment button on
handle, while button is depressed
slide handle into the Aluminum
Telescopic Pole, ensure to line up
depressed alignment button with hole
in Aluminum Telescopic Pole until
alignment button snaps into hole.
Step 1b:
Prior to plugging the power cord into
the Main Body in the next step, ex-
tend the Aluminum Telescopic Pole.
Step 3:
Center the Microfiber Pads on the Plastic
Trays and attach using the Hook & Loop
built into the Plastic Trays. The Plastic
Trays come pre-installed in the Main
Body and do not need to be removed to
install or remove the microfiber pads, but
if desired can be removed for cleaning.
Assembly:
Step 2:
Insert the wire lead into the electrical
connector located on the top end
of the Main Body. Depress the silver
alignment button then place the
Aluminum Telescopic Pole onto the
end of Main Body, align the hole in
the end of the pole with the silver
alignment button on the main body,
push in the button and slide the pole
down until the button locks into the
hole in the pole.
Step 4: (Refer to images above)
Plug in charge cable into the charge
port slot on the Main Body. Charge
battery for 3 to 4 hours prior to using.
DO NOT USE WHILE CHARGING.
