ASSEMBLING YOUR RAPTOR
Remove all Raptor contents from the box. Ensure all contents from the “PARTS LIST” section are accounted
for.
1. Locate the seat fame. Move the 2 suspension shocks into the u-shaped holders at the rear of the seat
frame. You may need to twist the shocks to enure the holes at the end of the shocks align with the holes of
the u-shaped holders. Insert an M8 x 38 screw through each holder and cap each one with an 8 mm nut. Use
the hex key and hex wrench to make sure the lug nuts are completely tightened to the screws.
5
Please visit
x 2
Tools
needed
