ASSEMBLY
UNPACKING STEPS
1. Insert the front wheel into the fork in the direction indicated by
the arrow in Figure (a). Make sure the front wheel hooks into the
front fork positioning hole. Then use an open-end wrench to
tighten the nut.
2. Place the protective nut onto the outside of the lock nut as
shown in Figure (b).
4. Insert the steering column into the front fork as shrown in figure
(c) at a desired height.
3. Peel back protective cover as shown by the arrow in Figure (d)
5. Tighten the top of the pole with a hex key as shown by the
arrow in Figure (e).
6. Push the protective cover back into place as shown in figure (f)
D
E
F
A
B
C
7
