background image

• Ensure that the charging port is clean and dry. 

• Make sure that there is no dust, debris, or dirt inside the port. 

• Plug the charger into a grounded wall outlet. The charging indicator light 

on the charger will be green. 

• Connect the charging cable to the power supply (100-240V,

 50/60 Hz).

• Align and connect the 3-pin charging cable into the charging port of the 

i-100. DO NOT FORCE THE CHARGER INTO THE CHARGING PORT, AS 

THIS MAY CAUSE THE PRONGS TO BREAK OFF OR CAUSE PERMANENT 

DAMAGE TO THE CHARGING PORT. 

• Once attached to the hoverboard, the charging indicator light on the 

charger should change to red, indicating that your device is now being 

charged. 

• When the red light on your charger turns to green, then your 

hoverboard is fully charged. A full charge may take up to 6 hours. While 

charging, you will see a red light.

• If you charge the hoverboard while it is powered on, you will see a yellow 

flashing light on the hoverboard that indicates it is charging. 

•After fully charging your i-100, unplug the charger from your i-100 and 

the power outlet. 

BATTERY SPECIFICATIONS

Battery Type: Rechargeable lithium-ion battery

Charge Time: Up to 5 hours

Voltage: 25.2V

Initial Capacity: 4Ah

BATTERY MAINTENANCE

• The lithium-ion battery is built into the i-100. Do not disassemble

the i-100 to remove the battery or attempt to separate it from

the i-100.

• Use only the charger and charging cable supplied by Hover-1. Use of any 

other charger or cable may lead to damage to the hoverboard, 

overheating, and risk of fire. Use of any other charger or cable voids the 

manufacturer warranty.

• Do not connect or attach the i-100 or the battery to a power supply plug 

or directly to a car’s cigarette lighter.

• Do not place the i-100 near a fire or leave it out in direct sunlight. Heating 

the i-100 can break or ignite the battery inside the device.

• Do not continue charging the battery if it does not recharge within the 

specified charging time. Doing so may cause the battery to become hot, 

rupture, or ignite.

• To preserve natural resources, please recycle or dispose of batteries 

properly. This product contains lithium-ion batteries. Local, state, or 

federal laws may prohibit disposal of lithium-ion batteries in ordinary 

trash. Consult your local waste authority for information regarding 

available recycling and/or disposal options.

• Do not attempt to modify, change, or replace your battery.

21

• Do not use your i-100 if the battery begins to emit odor, overheats, or 

begins to leak.

• Do not touch any leaking materials or breathe fumes emitted.

• Do not allow children or animals to touch the battery.

• The battery contains dangerous substances. Do not open the battery or 

insert anything into the battery.

• Do not attempt to charge the i-100 if the battery has discharge or emits 

any substances. In that case, immediately distance yourself from the 

battery in case of fire or explosion.

WARNING

SEEK IMMEDIATE MEDICAL ASSISTANCE IF 
YOU ARE EXPOSED TO ANY SUBSTANCE 
THAT IS EMITTED FROM THE BATTERY.

If a system error occurs or an improper operation is performed while 

riding the i-100, the device will alert the user in a variety

of ways. 

You will notice the running indicator light will turn red and you will hear a 

beep sound, alerting you to take precaution and cease operation. The 

hoverboard may stop suddenly.

The following are common occurrences that will produce safety alerts. 

These notices should not be ignored, and appropriate action should be 

taken to correct any improper operation, failure, or errors.

• Unsafe riding surfaces (uneven, too steep, unsafe, etc.)

• Battery voltage is too low.

• The i-100 is still charging.

• During operation, the platform self initiates to tilt due to excess speed.

• The hoverboard is overheating, or the motor temperature is too high.

• The i-100 has been rocking back and forth for over 30 seconds.

• If the system enters protection mode, the alarm indicator will light up 

and the hoverboard will vibrate. This typically occurs when the battery is 

about to run out of power.

• If the platform is tilted forward or backward more than 10 degrees, the 

i-100 will power off and stop suddenly, possibly causing the rider to lose 

balance or fall off.

• If any or both tires are blocked, the i-100 will stop after 2 

seconds.

• When the battery level has depleted below protection mode, the i-100 

will power off and stop after 15 seconds.

• If a high discharge current is produced during use (such as driving up a 
steep slope for a long period of time), the i-100 will power off and stop 
after 15 seconds.

Summary of Contents for H1-100




























Reviews:

Related manuals for H1-100