2. Using two hook and loop elastic straps, place the hook and loop side of strap downward and then pull
each strap through the holes on back of each pedal mount. Pull the straps all the way through until the
plastic fitting meets the pedal mount. Keep the four extra hook and loop elastic staps for replacement parts.
3. Wrap each hook and loop strap under your self-balancing scooter and pull the loose ends through the
holes on front of each pedal mount. Make sure your scooter is secured by tightening and fastening the hook
side to the loop side of each strap.
Plastic
Fitting
Hook and
Loop strap
Loop side
hook side
10