Hoval UltraGas (35-650) Operating Instructions Manual Download Page 3

Page: 3 / 48

4 205 044 / 00

For an optimal use of the heating system, read the operating instructions!

These instructions will provide you with all the information you need for an
optimal use of your heating system.
An optimally adjusted heating system can not only save you a lot of grief, but
also a lot of money.

1.1 Important addresses and telephone numbers

Heating installer:

......................................................................

Plumbing installer:

......................................................................

Electrical installer:

......................................................................

Chimney sweep:

......................................................................

Fuel supplier:

......................................................................

1.2 Key to symbols used

Instruction:

Prompts you to carry out an action

Result:

Shows the expected reaction to your action

Note:

Provides important information

Safety information:

Indicates an immediate hazard to persons

Warning information: Indicates danger to machines and installations

Energy saving tip:

Provides energy saving information

ENERGY

1. For an optimal use of the heating system, read the operating instructions!

Summary of Contents for UltraGas (35-650)

















































Search results

Summary of Contents for UltraGas (35-650)

Reviews:

Related manuals for UltraGas (35-650)

Brands by name

Popular brands

Hoval UltraGas (35-650), Operating Instructions Manual

Search results

Summary of Contents for UltraGas (35-650)

Reviews:

Related manuals for UltraGas (35-650)

Brands by name

Popular brands