18
4 204 764 / 00 - 11/07
Tap the “rotary pushbutton” to confirm the settings
Change - Exit:
Every flashing value can be corrected using the rotary button and
accepted by tapping. Use the key
to go back one step. Use the
key
� � �
or wait for approx. 60 sec. to go back to the basic display.
Select the day from which the heating time setting is to be copied by
turning the “rotary pushbutton”.
Note: The 3rd heating cycle is omitted if the 2nd heating cycle
does not contain any switching times.
Tap the “rotary pushbutton” to confirm the desired day.
Select the target day(s): Days of the week (MO...SU), whole week (1-7)
working days only (1-5), weekend only (6-7).
Tap the “rotary pushbutton” to confirm the setting.
Confirmation for correct copying of day(s).
Target range for the next copy process is shown flashing on the dis-
play.
Select the next copy range by turning the “rotary pushbutton”.
Target range for the copy process is shown again flashing on the
display.
Use the same scheme to create any additional copies.
After completing all the changes, tap the operating mode key to con-
firm the settings and open the basic display.
COPY
FROM MO
COPY MO
TO 1-5
COPY
DAY OK
COPY MO
TO 6-7
COPY MO
TO 50
Heating system control
