25
4 211 325 / 00
HeaTIng sysTeM conTroL
If P1 is displayed, it means that further standard heating time programs are already enabled.
If not, P2 and P3 can be enabled by the heating engineer.
Circuit
Day
Heating from
All heating circuits
(HC,MC-1,MC-2)
Mo-Th
Fr
Sa-Su
06.00-08.00 16.00-22.00
06.00-08.00 13.00-22.00
07.00-23.00
Domestic hot water
circuit
(DHW)
Mo-Th
Fr
Sa-Su
05.00-08.00 15.30-22.00
05.00-08.00 12.30-22.00
06.00-23.00
Circuit
Day
Heating from
All heating circuits
(HC,MC-1,MC-2)
Mo-Fr
Sa-Su
07.00-18.00
reduced
Domestic hot
water circuit
(DHW)
Mo-Fr
Sa-Su
06.00-18.00
reduced
Factory setting:
Switching times program P2
Factory setting:
Switching times program P3
0 2 4 6 8 10 12 14 16 18 20 22 24
06.00-22.00
SU-1-
� � �
0 2 4 6 8 10 12 14 16 18 20 22 24
-.---.--
MO-2-
Tap the “push & turn button” to ac-
knowledge the set end time.
Set a second heating time (Mo -2-) by
turning the “push & turn button."
Set the switching times as described for
the previous heating circuits.
Keep turning to reach the following day.
Set the switching times as described for
the previous days.
Tap the “Operating mode selection” key
to acknowledge the settings.
0 2 4 6 8 10 12 14 16 18 20 22 24
06.00-22.00
MO-1-
17
After confirmation of the end time, the
day of the week flashes again.
i
18
19
20
21
You can also copy the switching times
from other days (see Chapter 4.7.4).
i
22
