Assembly aid:
To simplify installation, the sealing on the burner
flange can be lubricated using a heat-resistant paste
(e.g. Kluberpaste UH1 84-201).
«Warning» sticker
Fig. 04
5.
Insert the burner in the burner flange, still turned
through 15° (final position: burner rating plate at the
front), and when it reaches the stop, turn it through
15° so that the projection hangs under the screw
Fig. 05
Screw head
Fig. 06
6.
Fix the burner in position by tightening the screw (3,
Fill the cavity between burner pipe and boiler
door with the fireproof fibre provided.
The recirculation slots must remain open.
Note that
-
the fireproof fibre must be packed firmly into the cavity
to prevent it falling out (Fig. 07)
Fireproof fibre
Fig. 07
6
4 213 784 / 00
ASSEMBLY
Summary of Contents for 41-UltraOil 16
Page 35: ...35 4 213 784 00...
