Jumper J10: Keyboard Power On Selector
If you enable the keyboard power on feature, you can use hot keys
on your keyboard as a power on/off switch for the system.
Note:
Make sure that the system can provide 1A on +5VSB (+5V
Standby) signal before using the Keyboard Power On function.
Function
Jumper Setting
Disable Keyboard Power On
Short Pins 1-2
Enable Keyboard Power On
Short Pins 2-3
Jumper J9: Clear CMOS Memory
Use this jumper to clear the contents of the CMOS memory. You
may need to clear the CMOS memory if the settings in the setup
utility are incorrect and prevent your mainboard from operating. To
clear the CMOS memory, disconnect all the power cables from the
mainboard and then move the jumper cap into the CLEAR setting
for a few seconds.
Function
Jumper Setting
Normal Operation
Short Pins 1-2
Clear CMOS Memory
Short Pins 2-3
Jumper JP6: Enable/Disable Onboard LAN
Use this 3-pin jumper to enable or disable the onboard network
adapter.
Function
Jumper Setting
Enable Onboard LAN
Short Pins 1-2
Disable Onboard LAN
Short Pins 2-3
Jumper JP7: Enable/Disable Onboard Audio
Use this 3-pin jumper to enable or disable the onboard audio
system. If you install a different audio system on an expansion
card, you must disable the onboard audio system. If you use this
jumper to disable the audio system, it automatically disables the
onboard Fax/Modem, even if the Fax/Modem jumper JP8 is
enabled.
