M10537-0-0710
Page 2
Empire Comfort Systems Inc. • 918 Freeburg Avenue • Belleville, IL 62220
Mantel Installation Instructions
1. Align and attach the breast board to the right and left side
assemblies. See Figure 2. Breast board ends should be flat
against the inside edges of the side assemblies and flush at the
top of the side assemblies. Use of a square is recommended to
ensure a 90° installation.
BREAST BOARD
LEFT SIDE
ASSEMBLY
RIGHT SIDE
ASSEMBLY
1-1/4” SCREWS
Figure 2
2. Attach the 42” wall cleat 49-1/2” above the floor. Ensure that
the wall cleat is level. See Figure 3.
FLOOR
WALL CLEAT
49-1/2”
1-1/4” SCREWS
Figure 3
3. Attach the surround assembly to the wall cleat using two
finishing nails through the breast board. See Figure 4.
Figure 4
4. Attach the top inside edge trim to the bottom of the breast
board using two finishing nails. See Figure 5.
BREAST BOARD
TOP INSIDE
EDGE TRIM
Figure 5
5. Attach the side inside edge trim to the left and right side
assemblies using two finishing nails on each side. See
Figure 6.
INSIDE EDGE TRIM
Figure 6