C
F
F
C
Diagram 4
Diagram 5
B
C
L
L
L
L
Diagram 6
5. Install 1 cross brace panel (F) into the bottom cam bolt of both side panels (C).
Make sure the 2 holes on side of brace are facing down. Diagram 4.
6. Install the other cross brace panel (F) into the top cam bolts of side panels (C).
Make sure the 2 holes on side of brace are facing up. Diagram 4.
7. Insert cam lock (L) into side panels (C) and secure by locking the cam bolts and locks.
8. Place base panel (B) onto side panels by inserting cam bolts into holes.
Insert cam lock (L) and secure by locking the cam bolts and locks. Shown in Diagram 5.
9. Turn cabinet right side up and sit on feet. Place top panel (A) onto cabinet by inserting
cam bolts into holes. Insert cam locks (L) and secure by locking the cam bolts
and locks. Shown in Diagram 6.
10. Take 2 back panels (E) and attach to top and bottom back of cabinet by using
18 screws (I). Shown in Diagram 7. White side facing the inside. This should result in
approximately a 3 inch gap at the center of the unit.
L
L
L
L
C
A
E - white side
3” gap
E - white side
Diagram 7
E
I
I
I
E
