Housegard System Link SA423WS, User Manual

Page: 5 / 40

5
GB
PREPARING AND PROGRAMMING
IMPORTANT: This device is equipped with transmitters and receivers, so they can communicate with each other. For this function to
work, the smoke alarm devices must be programmed to be linked together.
WIRELESS TRANSMITTER/RECEIVER
» Radio frequency: 868,082 MHz
» RF receiver: <5 mA
» RF receiver: <10 mA
» Typical range: 30 metres
IMPORTANT: The signal range may vary depending on
position, the design of the building and its materials. Make
sure that all the installed smoke alarm devices are within
signal range.
PROTECT YOUR HEARING
Smoke alarm devices emit a loud audible signal. We recommend
that you always use earplugs or other hearing protection when
programming and testing your smoke alarm devices.
FITTING THE BATTERIES AND TESTING EACH SMOKE
ALARM DEVICE
Twist off the devices mounting plate and install 1 x DC 9V bat-
tery. Make sure you have the right po/- . Test each smoke
alarm device by firmly pressing down the test button for 1 second
and release.
r= 100 metres free space,
30 metres in building (depend on construc-
tion and obstruction)
1
18
17
16
15 14
13
12
11
10
9
8
7
6 5
4
3
2
19
20
21
22
23
24
25
26
27
28
29
31
32
30