Hougen 05536 Manual Download Page 2

Page: 2 / 2

MOTOR

(05536) SPINDLE ADAPTER KIT

Set-Screws

Hex Adapter

Approx. 1.188”

Approx. 2.38”

Approx. 5.875” when the drill motor

is in the UP position with 4” of stroke down.

Magnet

Drill Chuck

Your 3-Jaw Chuck is now installed. Select the proper twist bit for your application and follow Operating Proce-

dures for the Hougen Magnet Based Drill you are using.

40432 Stop Screw SHC 1/4-28 X 3/8 to use with the HMD904 or HMD908.
05357 Stop Screw SHC 1/4-28 X 7/8 to use with the HMD925.

Now that the Chuck and Adapter is installed, part number

40432 Stop Screw needs to be installed on the HMD904

& HMD908 or install the 05357 on the HMD925. This Stop

Screw sould be threaded into the top of housing in front of

the Motor Assembly as shown in Diagram 6.

Chuck sold separately

Hougen Manufacturing, Inc.

P.O. Box 2005 • Flint, MI 48501-2005

3001 Hougen Drive • Swartz Creek, MI 48473

Phone (810) 635-7111 • Fax (810) 635-8277

www.hougen.com • [email protected]

FORM 05547

Summary of Contents for 05536

Page 1: ...om the top of the Arbor Body and the Front Support Bracket Bolts B from the front of the Magnet Once these are removed the Arbor Body Assembly can be removed from the Drill Assembly 1 2 3 4 5 Thread t...

Page 2: ...o use with the HMD904 or HMD908 05357 Stop Screw SHC 1 4 28 X 7 8 to use with the HMD925 Now that the Chuck and Adapter is installed part number 40432 Stop Screw needs to be installed on the HMD904 HM...