HOUGEN
®
PORTABLE MAGNETIC DRILL
Welcome to Hougen
Congratulations on your purchase of the Hougen
®
Portable Magnetic Drill. Your model is designed to produce
superior holes quickly and efficiently. Through constant innovation and development, Hougen is committed to
provide you with hole-producing tools and products to help you be more productive.
Before attempting to operate your new Portable Magnetic Drill, please read all instructions first. These include
the Operator’s Manual and Warning Label on the unit itself. With proper use, care, and maintenance, your
model will provide you with years of effective hole drilling performance. Once again, thank you for selecting
our product and welcome to Hougen.
INDEX
2
Always wear eye protection while
using cutting tools, or in the vicin-
ity of cutting.
CAUTION!
The slug is ejected
at the end of the cut. Do not aim
cutter or arbor so that ejected
slug may hit someone around, or
below you.
CAUTION!
Cutters are sharp.
Wear gloves when installing or
removing cutter from arbor. Do
not grab a rotating cutter.
CAUTION!
To prevent electric
shock, do not use power tools
near wet areas, or where power
tool may become wet.
SAFETY FIRST
Specifications
Cutter Type.......................RotaLoc
Hole Capacity....................1/2” to 1-1/16” (12mm - 27mm)
Depth of Cut......................3/4” (19mm)
Motor.................................240 volt - 3.6A, 450 RPM
Electrical System..............240 volt - 50/60 Hz, 4A, 960W
Net Weight.........................21.3 Lb
Your new Hougen Magnet Base Drill now incorporates a Label for the Drill Part Number and Serial Number.
Below gives a explanation of the Part Number and the location of the Label is shown on the Drill Breakdown
Diagram .
Important Safety Instructions
Review of Controls
Rotaloc™ Cutter Installation
Operating Instructions
Commercial Limited Warranty
HMD115 Parts Breakdown
Parts List & Rotaloc™ Cutters
Motor Diagram & Parts List
Wiring & Hookup Diagram
Factory Authorized Warranty Centers
3-4
5
5
6
7
8
9
10
11
12
The Ultra Low Profile Drill is offered in many versions. Refer to the Serial/Part number Label on your
housing to direct you to the correct breakdown.
Serial/Part Number Label
