HotwireThermostat
Instructions
Menu Settings
Press Power buttton to turn off the thermostat.
Press and hold button Prog for 3 seconds to bring up a configuration menu. Now press Prog button to select different menu number.
Set the temperature readout(AF model only). This gives option to choose to show air
A= to show air temperature,
A - F = to show both in 5 second intervals
temperature,floor temperature or to show both floor & air in interval.
01 = 5+2 day programmable
02 = 7 day programmable
LOAD (16A)
FEED
230 VAC
Floor Sensor
L
L
N
N
Power Supply:
10%, 50/60Hz
Load Capability: <16 A, 220VAC
Accuracy: 1deg C
Set-point range: ambient 5~30 deg C
floor 5~40 deg C
Storage: -20~50 deg C
Sensor selection. This thermostat is a combination model allowing you to choose
between 3 different models. (A, AF,F,)
A model: air only , with built in sensor
AF model: air & floor , with both built in and remote sensor
F model: floor onl y , with remote sensor
Menu #
1
Switching differential.
Calibrate the room temperature. This feature is used to compensate for any difference
Calibrate the floor temperature. This feature is used to compensate for any difference
Set the floor temperature limit(AF model only).
Select temperature format
Select 12 / 24 hour clock
24
12 / 24
2
3
4
5
6
7
8
9
10
Feature Description
Factory Default
Feature Value
0°C
ON / OFF
OFF
01
40
A
°C
20°C ~ 40 °C
°C / °F
°C
A / AF / F
A
Press up or down button to select
The numbers of degree difference before switching. The default is
between the displayed room temperature and a thermometer.
between the displayed floor temperature and a thermometer.
This feature is to protect the floor surface.
°C or °F.
Program type selection. This gives user 2 options of program type.(5+2 or 7 day programmable)
5+2 day will give you 5 days(Monday to Fiday) with the same four events(Wakeup, out,
7 day will give you individual settings for each day from Monday to Sunday.
home,sleep) and 2 days(Saturday and Sunday) with the same four events.
Frost protection.
This feature is to avoid room temperature goes below 5 °C
1°C which means the thermostat will switch the heating on 0.5°C below the set
temperature and will turn it off 0.5°C above the set temperature.
With a 2°C differential, the heating will switch on 1°C below the set temperature
and will switch off 1°C above the set temperature.
1°C
1°C ~ 5°C
-5°C ~ +5°C
0°C
-5°C ~ +5°C
F=to show floor temperature,
HotwireThermostat
Instructions
Menu Settings
Press Power buttton to turn off the thermostat.
Press and hold button Prog for 3 seconds to bring up a configuration menu. Now press Prog button to select different menu number.
Set the temperature readout(AF model only). This gives option to choose to show air
A= to show air temperature,
A - F = to show both in 5 second intervals
temperature,floor temperature or to show both floor & air in interval.
01 = 5+2 day programmable
02 = 7 day programmable
LOAD (16A)
FEED
230 VAC
Floor Sensor
L
L
N
N
Power Supply:
10%, 50/60Hz
Load Capability: <16 A, 220VAC
Accuracy: 1deg C
Set-point range: ambient 5~30 deg C
floor 5~40 deg C
Storage: -20~50 deg C
Sensor selection. This thermostat is a combination model allowing you to choose
between 3 different models. (A, AF,F,)
A model: air only , with built in sensor
AF model: air & floor , with both built in and remote sensor
F model: floor onl y , with remote sensor
Menu #
1
Switching differential.
Calibrate the room temperature. This feature is used to compensate for any difference
Calibrate the floor temperature. This feature is used to compensate for any difference
Set the floor temperature limit(AF model only).
Select temperature format
Select 12 / 24 hour clock
24
12 / 24
2
3
4
5
6
7
8
9
10
Feature Description
Factory Default
Feature Value
0°C
ON / OFF
OFF
01
40
A
°C
20°C ~ 40 °C
°C / °F
°C
A / AF / F
A
Press up or down button to select
The numbers of degree difference before switching. The default is
between the displayed room temperature and a thermometer.
between the displayed floor temperature and a thermometer.
This feature is to protect the floor surface.
°C or °F.
Program type selection. This gives user 2 options of program type.(5+2 or 7 day programmable)
5+2 day will give you 5 days(Monday to Fiday) with the same four events(Wakeup, out,
7 day will give you individual settings for each day from Monday to Sunday.
home,sleep) and 2 days(Saturday and Sunday) with the same four events.
Frost protection.
This feature is to avoid room temperature goes below 5 °C
1°C which means the thermostat will switch the heating on 0.5°C below the set
temperature and will turn it off 0.5°C above the set temperature.
With a 2°C differential, the heating will switch on 1°C below the set temperature
and will switch off 1°C above the set temperature.
1°C
1°C ~ 5°C
-5°C ~ +5°C
0°C
-5°C ~ +5°C
F=to show floor temperature,
In Auto mode, to temporarily override the current setpoint temperature,
1. Press up or down button once, the set temperature starts flashing.
2. Press up or down button again to adjust the set temperature.
3. Press OK button to confirm the setting with OVERRIDE shown.
Now your thermostat will maintain the new set temperature until the next setpoint.
To cancel the override setting, press Del button once.
Temporary temperature override
Press and hold up button to lock the thermostat. A lock icon will display.
Key Lock & Unlock
Press and hold down button to unlock the thermostat. The unlock icon will dissapear.
Your thermostat has the ability to reset all settings to the factory defaults. In standby
mode(when thermostat is turned off), press and hold Clock button and
Day button for 5 seconds until --:-- is shown(shown for 5 seconds only)
* Note no program changes are possible while the unit is locked.
Resetting factory defaults
Defaults are as follows:
Event 1 7:00 am
Event 2 9:30 am
Event 3 4:30 pm
Event 4 10:30 pm
Installation Instructions
Using a screwdriver unscrew the front plate from the back plate. Then pull
the bottom of the thermostat towards you off the back plate. Wire up the
thermostat as per the wiring diagram below, then place the back plate into the flush
box and tighten it with the screws provided. To replace the thermostat put the top
into the backing plate and then push the bottom of the thermostat in. Then replace
screw holding both parts together.
Blue wire from element
Brown wire from element
Line from switch box
230/240 VAC
Connect green wire from the
element to the house earth
(Cables can go either side)
House Neutral
Event 1 6:00 am
Event 2 8:30 am
Event 3 5:00 pm
Event 4 10:00 pm
