Hottek HT-979-001, User Manual

Page: 9 / 16

ENG
9
• The appliance sale has to be carried out in accordance with the current
legislation of the participating countries of the Customs Union.
Attention! In case of prolonged toasting, the toasts can flame up.
Attention! Toaster metal parts run hot during operation.
Attention! When the appliance is turned on for the first time, a short-term
smell of burnt oil can occur - it means that an excess lubricant available on the
heating element is removed. This is not a failure symptom.
Attention!
The appliance is not intended for actuation of an external timer or
separate remote control system.
Overview of the component parts
1. Body of the appliance
2. Crumb tray
3. 2 compartments for toasts
4. Toast loading lever
5. 6-position browning control
6. Stop button
Before first use
• Remove the appliance from packaging and remove all the packing materials.
• Unwind the power cord in full.
• Place the appliance on a dry, flat and heat-resistant surface.
• Before turning on, make sure that the voltage indicated on appliance name -
plate corresponds to the voltage of electric network.
• Plug the appliance into electric outlet. The appliance is ready for use.
• Without inserting food into the toaster, turn it on and set the timer (5) to
maximum position.
• After the appliance automatically switches off, repeat this procedure again,
while ventilating the room.
• When the appliance is switched on for the first time, a short-term smell of
burnt oil can occur - it means that an excess lubricant available on the heat -
ing element is removed. This is not a failure symptom.
Using the appliance
• Plug the appliance into electric outlet and place the prepared bread slices in
special compartments (3).
• Set the 6-position browning control (5) to one of positions. Choose a low
toasting degree (1-2) for little browning, medium (3-4) for moderate toasting
and high (5-6) for intense toasting.