Hottek HT-964-250, User Manual

Page: 11 / 20

ENG
11
• Proceed with hair styling.
• After the procedure hair straightening slide the On/Off switch (2) from «On»
to «Off», indicator light (3) will go out.
• After completion of all tasks, turn off the appliance and unplug it, let it cool
down.
Hair styling
• Wash your hair and dry them.
• To keep your hair away from high temperatures, treat them with thermal
protective aid.
• Prepare the appliance for use as described in the "How to use"section.
• Divide the hair into strands no more than 4-5 centimeters wide. Remember
- the narrower the strand, the more resistant will be the result. Straightening
should begin with the occipital part of the head.
• Place the appliance plates as close to the hair roots as possible. Run
the straightener down the entire length of the hair. To obtain high-quality
straightening is recommended to carry out the procedure without haste.
• Repeat this procedure if necessary, until the desired result is achieved.
Secure your hair with styling products.
Cleaning and Maintenance
• Unplug and cool down the appliance before cleaning.
• Never put hair dryer and cord into water or other liquid Clean the
casing and plates with a soft, damp cloth, without any additional
cleaning agents.
• It is forbidden to use abrasive detergents and solvents for appliance
cleaning.
Storing
• Before putting the appliance away for storage, it is necessary to cool it
down and make sure that its body is clean and dry.
• Never wrap the cord around the unit. This could cause the cord to wear
prematurely and break.
• Keep this appliance is a dry, cool place, which is inaccessible to
children.
• Electrical equipment have to be stored in a dry place at ambient
temperature no higher than plus 40 °C with a relative humidity of 70%,
and the absence of dust, acid and other fumes in surrounding medium
which affect adversely the materials of the electrical devices.