Hottek HT-964-003, User Manual, Page: 19 / 32

ENG
19
• Set the detachable attachment comb (Pic. 6).
• Push the switch to ON to turn on the hair trimmer.
• Start to clip from occipitals and at the sides, then clip in the
front moving to the crown. All the movements should be
performed against the hair grown direction.
• Watch the speed of movement of the appliance when
clipping. The best results can be achieved when the
appliance moves with its internal speed without being
manually accelerated.
Warning: when clipping hold the trimmer properly (Pic. 7). Do
not use the trimmer upside down.
• The final treatment should be performed without an
attachment by light stroking movements along the hair
grown direction starting from the crown.
Warning!
• The hair trimmer can continuously operate for 20 minutes
maximum in order to prevent from overheating of the
engine. You can continue operation after a 10 minutes
break.
• The appliance is designed for clipping dry hair; do not use
it for clipping wet and soppy hair.
• The power cord can normally get warm during charging.
• Unplug the cord when operating using the battery.
Otherwise, it will result in discharging the battery.
Oiling
• The blades should be oiled after every haircut.
• Turn the appliance off using the On/Off switch (3).
• Apply one-two drops of oils at the blade’s teeth and back
side of the top blade and then switch the unit on and make
sure it is running smoothly.
• Unplug the appliance and remove surplus oil with a dry
cloth.