Hotspot Franklin T10, User Manual

Page: 23 / 53

- Multi SSID Isolation: If On is selected, it prevents your devices from communicating
across the Main and Guest Wi-Fi access points.
- Allow Guest Wi-Fi users to access the Web interface: If the box is checked, users on
the Guest Wi-Fi also can access the Web User Interface.
- Wi-Fi Name: Service Set Identifier (SSID). To change it, enter a string less than 32
characters as the name for your wireless local area network (WLAN).
- Wi-Fi Password: To change, enter the new Wi-Fi password. The password needs to
be at least 8 characters long. l Privacy Separator: If ON is selected, your devices on
the same Wi-Fi Name can't make Local Area Network communication.
- Wi-Fi Band: It supports both the 2.4- and 5GHz bands of wi-fi spectrum for top
throughput. You can choose Wi-Fi Band depends on your preference.
NOTE : if you connect WLAN printer to your Mobile Hotspot, Privacy Separator should be
OFF to send file from your PC to the printer
- SSID Stealth: If ON is selected, the Wi-Fi name won't be found by other devices
around it. You need to manually enter the Wi-Fi name and connect.
- Authentication Method: The authentication methods are described below.
- Encryption Method: Select an encryption method from the drop-down list.
- Display Wi-Fi Name and Password: If ON is selected, the Wi-Fi Name and Password
will be displayed on your Mobile Hotspot device display.
Mode Description
WPA-PSK/WPA2-PSK Apply both the WPA-PSK and WPA2-PSK scheme.
WPA2-PSK
WPA-PSK is the securer version of WPA with
implementation of the 802.11i standard.
SHARED Authentication via Shared Key protocol.
OPEN
Authentication and encryption won't be performed.
There are risks that private info will be intercepted or
network will be used by unauthorized individuals.
19