Hotset GmbH
183
Start-up-, Service- and Operation Manual hotcontrol cDT+
Rev. 1.00.05
Subject to technical changes
18.1.3Interface XS5 20 mA (Option)
18.1.4Interface XS7 external operation (Option)
XS5
Interface 20 mA Option
20 mA
D-SUB, socket
Pin
Function / signal
1
n.a.
2
20 mA+ 20 mA+
3
20 mA-
20 mA-
4
n.a.
5
n.a.
6
n.a.
7
n.a.
8
n.a.
9
n.a.
The 20 mA interface XS5 is only released by manufacturer ., when
the device is deployed in markets, where cTUVus certification is not
applied .
Only one interface can be operated either
Interface XS5 20 mA (Option), if both are established.
The 20 mA interface is established on the rear wall of
hotcontrol
cDT+
below XS1, XS2, XM3, when existing.
XS7
Interface external operation Option
Ethernet, CAN, 24VDC
Hybrid flush-type socket wall bushing; 8 poles
The interface XS7 for external operation is only released by man-
ufacturer when the device is deployed in markets, where cTUVus
certification is not applied.
The interface XS7 for external operation is established on the rear
wall of
hotcontrol cDT+
left beside XM1, when existing.
