Hotronic TECH DRY, Operating Manual, Page: 18 / 126

TECH DRY
18
3. Before commissioning
3.1 Transport
Check the device for transport damage. Report any damage to the manufacturer immediately.
3.2 Installation of device
11.
Helmet and Hat Holder/Vent
12.
Left Chip Hole
13.
Right Chip Hole
14.
Left Chip
15.
Right Chip
Holder/Vent 11 works for helmet and hat etc.; there is no auto start and stop sensor on Holder 11,
press + and - together to start and stop it.
Holder/Vent 2 works for footwear, sock and glove etc.; when install Holder 2, Left Chip 14 must be
put into Left Chip Hole 12 and Right Chip 15 must be put into Right Chip Hole 13.
Shoe Holder/Vent 2 owns function of auto start and stop, while it is also able to be operated by
pr and - together.
4. Commissioning
4.1 Features

Settable time and temperature.

Drying Temperature reaches up to 70
℃
, suitable for extremely cold areas.

Automatic start/stop (with optional manual start/stop)

Digital display

Thermal Safety cut-out protection

Quiet operation

Detachable Vents/Holders for shoes, boots and socks, or helmets.