Hotpoint XAL85 Series, Operating Instructions Manual

Page: 6 / 12

6
GB
SHELVES:
Due to the special guides the shelves are removable and the
height is adjustable allowing easy storage of large containers
and food. Height can be adjusted without complete removal of
the shelf. (see diagram),
1
2
TEMPERATURE Indicator light
*
: to identify the coldest area in
the refrigerator.
1. Check that OK appears clearly on the indicator light (see
diagram).
2. If the word “OK” does not appear it means that the temperature
is too high:set the FRIDGE TEMPERATURE on a colder value,
and then wait 10 hours until the temperature becomes stable.
3. Check the indicator light again: if necessary, readjust it
following the initial process. If large quantities of food have
been added or if the refrigerator door has been opened
frequently, it is normal for the indicator not to show OK. Wait
at least 10 hours before you set the FRIDGE temperature on
a colder value.
Operation and maintenance of the water
dispenser.
When first used, or after prolonged periods of inactivity, wash the
tank with water. The water dispenser supplies cold water without
having to open the refrigerator door each time.
This also allows for reducing the product’s energy consumption.
To fill the tank, lift the flap or remove the cover (see picture) then
pour in the water with a carafe or other suitable container. Avoid
filling the tank completely.
1
7
2
4
5
6
4
3
5
6
8
9
Always exclusively use drinkable natural mineral water: any
other liquid may hamper the device’s correct operation.
To withdraw water with the refrigerator door closed, press the
dispenser actuator with a suitable container (glass, carafe, etc.).
Release the actuator once the desired quantity has been dispensed.
The water tank should be cleaned regularly under running water; do
not use detergents. To clean the tank, remove the tank cover and
upper ledges; subsequently, remove the tank by pulling it outwards
while pressing the appropriate button (see picture).
The tank must be replaced back into its housing as soon as
possible so as to avoid excessive heating of the refrigerator.
1
7
2
4
5
6
4
3
5
6
8
9
For more thorough cleaning, it is advisable to unscrew the valve
from the tank (see picture) and clean it under running water.
! Be careful not to pull the transparent mobile element of the valve.
1
7
2
4
5
6
4
3
5
6
8
9
Once cleaning operations have been completed, screw the
valve back on while ensuring that the internal seal adheres to the
end part of the tank bushing; subsequently, put the tank-valve
assembly back into the appropriate cylindrical housing of the
door, while making sure that the upper hook on the rear wall of
the tank is properly inserted in the appropriate compartment on
the inner wall of the door. Put the previously removed ledges and
tank cover back in place.
! Make sure that the tank has been properly inserted in the
door (see picture).
1
7
2
4
5
6
4 3
5
6
8
9
! The presence of water drops on the tank walls is a normal
occurrence during the product’s operation.
! Dry any drops present on the outer walls of the product.
! To empty completely the Water Tank, please disassembly
it as shown on the picture, spill the water, clean with a soft
textile and assembly in the product.
! If the water drops remain on the external door surface
after use, clean it with a soft cleaning textile.