(continued)
to
the Soak
(on models so equipped)
●
Soak: Turn the cycle selector to soak. Start the
●
NOTE: For an extended soak, allow the washer
washer. Add
detergent or soak product;
to fill and agitate for a few minutes to dissolve the
add clothes.
soaking agent. Then push in the Cycle Selector knob
to stop the washer (keep lid closed) and allow to
soak for as long as desired. After desired soak
period, pull out the Cycle Selector knob to complete
the cycle.
H
OW
to Use the Auto Soak
(on models so equipped)
In the Auto Soak cycle the washer fills, agitates and
●
with Auto Soak: Set the Cycle Selector
soaks for the time you selected. It automatically
knob for Auto soak. Start the washer. The washer
advances into the next cycle.
will agitate, soak and automatically advance into
the
If your clothes and household items don’t look clean
and fresh after washing, you will probably rewash
them.. and that means you’ll waste energy. Remember
to sort your clothes carefully, and load them properly,
select correct cycles, use enough detergent and choose a
water temperature warm enough to release and get rid
of soil.
●
Try to wash less often. Save articles of the same type
of fabric until you have a full load.
8
●
If you must wash smaller loads, adjust the amount of
water. Small loads should have lower water levels.
●
Always rinse in cold water. The temperature of the
rinse does not affect cleaning.
Wash in off-peak utility hours. Your local utility can
tell you which are the off-peak hours.
●
Use your washer’s Normal Spin. This will remove
more water during spin, which will shorten drying
cycle to save more energy.
Summary of Contents for WW3440S
Page 21: ...NOTES 21...
Page 22: ...NOTES 22...
