9
GB
Function
Effect
Comments
Enabled
with
programmes:
Time Delay
Delays the start
of the wash by
up to 9 hours.
Press the button repeatedly until the LED corresponding to
the desired delay is turned on.
The fifth time the button is pressed, the function will be
disabled.
N.B.: Once you have pressed the Start/Reset button, the delay
can only be decreased if you wish to modify it.
All
Super Wash
Allows for an
impeccable wash,
visibly whiter
than a standard
Class A
wash.
A, B, C, D,
E, F, G, H
Reduce
Creases
This option
reduces the
amount of
creasing on
fabrics, making
them easier to
iron.
If you set this option, programmes F, G, H, L and Delicate Rinse
will be suspended, leaving the laundry to soak (Anti-crease)
and icon will flash:
- to conclude the cycle, press the START/RESET button;
- to run the draining cycle alone, set the knob to the relative
symbol and press the START/RESET button.
All
programmes
excepts for
A, B, J, K
and Rinse
cycles
Extra Rinse
Increases the
efficiency of the
rinse.
Recommended when the appliance has a full load or with large
quantities of detergent.
A, B, C, D, E,
F, G, H and
Rinse
cycles.
Personalisations
Setting the temperature (Variable Temperature )
Turn the VARIABLE TEMPERATURE knob to set the wash temperature
(see Programme table on page 8)
.
The temperature can be lowered, or even set to a cold wash (No Heat).
Setting the spin speed (Variable Spin)
Turn the VARIABLE SPIN SPEED knob to set the spin speed for the programme selected.
The maximum spin speeds for each programme are as follows:
Programmes
Maximum spin speed
Cotton
1000 rpm
Synthetics
800 rpm
Wool
600 rpm
Silks
no
The spin speed can be lowered, or the spin cycle can be excluded altogether by selecting
No Spin
.
The washing machine will automatically prevent you from selecting a spin speed higher than the maximum
speed for each programme.
Functions
To enable a function:
1. press the button corresponding to the desired function, according to the table below;
2. the function is enabled when the corresponding button is illuminated.
Note: The rapid flashing of the button indicates that the corresponding function cannot be selected for the
programme set.
Service
Troubleshooting
Precautions
Care
Programmes
Detergents
Installation
Description
All manuals and user guides at all-guides.com
