Hotpoint WMT01 Installation And User Instructions Manual Download Page 18

Options

18

Choosing an option button
To choose an option, press the button and you will see a light come on above the
button. Press again to cancel, and the light will go out. You cannot alter the options
once the machine is running.

RINSE HOLD... use this option to...

Help reduce the creasing of delicate or synthetic fabrics by holding 
clothes in the final rinse water.
The ‘RINSE HOLD’ option light will flash to indicate that the programme 
is holding the clothes in the final rinse water. Complete the final spin by 
pressing the ‘RINSE HOLD’ button again when the light is flashing.
This option is not available with Wool or Spin only programmes.
This option is only available on WMT02, WMT03 and WMT05.

ECONOMY... use this option to...

Save money and time on lightly soiled loads.
This option is not available with Quick Wash, Rinse and Spin or Spin only 
programmes.
This option is only available on WMT03.

SUPER RINSE... use this option for...

Large wash loads and items for young children or people with            
sensitive skin.
This option increases the water level of the first two rinses.
This option is not available with the Cold Wash, Rinse and Spin or Spin 
only programmes.
This option is only available on WMT01, WMT02 and WMT 05.

TIME SAVER... use this option for...

Saving up to a third on the programme time.
This option is not available with the Quickwash, Rinse and Spin or Spin 
only programmes.
This option is only available on WMT01.

Option Buttons

PR

OGR

AMMES

AND  OPTIONS

Summary of Contents for WMT01

























Reviews: